Decoration season has arrived, as the home of essential decoration materials, ceramic tiles in the construction of the need to pay attention to what issues?
1, tile water demand bubble Shui
Now often see some customer return no when you are finished using the ceramic tile and found some cannot return because tile soaked in water. Now manufacturers or traders generally cannot be returned, if there is no use of tiles which would cause unnecessary waste. Recommendation: the number of foam used in need, to how much and how many foam construction, not all one-time Cody, water in conjunction with the progress of construction workers.
2, tiles in the tile drain tiles before for program
A lot of construction workers are the bricks on the shop floor, etc., however, to a certain extent found ceramic tile drainage tiles, and less coordination, then remove the new paving, causing unnecessary losses and waste. Suggestion: before the paving stones for the brick of the row.
3. the correct selection of cement grade and provisioning of the mix of cement and sand
Access to the many friends of tile reflection cracking case, some of which is due to the mix of cement and sand caused by improper or cement grade is too high a proportion of the cement, ceramic tile adhesive power, brick can quickly wash fastness, but cement mix high coefficient of cement mortar, easy in paving brick crowded after cracking. The recommended ratio of 1: 3 wall tiles, floor tiles is: 1: 2, cement cement grade 32.5, cement.
4. be careful of ceramic tile manufacturing
Special tiles in touch when Yang Kok, edging to be careful not to damage the enamel layer of ceramic tiles, link to the attention of the slit, not too small.
5, when processing the flue or wall is the wall must regulate treatment
Back wall cannot use emission do wall material (this practice is known to not work, but now the construction workers often such treatment, as owners, it is important to note), tile easily cause tiles bow falls off and cracking.
6, tile joints should not be too small
Tile joints are too small to decrease the life of ceramic tiles, ceramic tiles after contraction crack glazed when crowded.
Recommendation: whether it's a seamless tile seamless tiles or not or, in the construction, it is important to note that joints.
7, the workers in question to found ceramic tile with timely notification
This point is the current time in construction decoration company is doing poorly, this is the case, in particular material is not recommended, as they tend to continue with the work, in fact, this approach is completely irresponsible. Wait until all paved, you find a problem to deal with is more trouble, construction and material selection Committee of the parties have to each, and finally rework, this process will consume a lot of effort and financial resources. Therefore, in the construction, to clearly tell workers, one finds a problem, to timely notice.
Recommendations: in order to avoid this situation, it is best to find problems in a timely manner is informed, you can make sales and construction party identification, don't put together things onto the last construction to finish later.
8, fillers, such as tile dry solid best after
Filler now many workers are in the tile shop after starting immediately, so that processing jointing is inappropriate, due to the tile does not completely dry solid, filler, easily loose tiles, ceramic tiles come in late, will leave a security risk.
Recommendation: tiles jointing in ceramic tiles after dry solid. General 24 hours after any time.
9, walls in tile before cleaning the walls
Some irresponsible construction team in paving tiles, walls scraped through PuTTY wall tile, no PuTTY spatula down directly tile, this security risk is very big, as big cement world, PuTTY, cement walls could easily lead to loss of ceramic tiles. This is very insecure.
Recommendations: in the tile must be checked against the wall, if the wall has a crack must first be processed while the wall surface to be cleaned.
10, tiles in the tile is made for the protection, not to scratch the surface of the brick, brick surface contamination
In the absence of dry solid brick surface walking, doing wall paint, coating and other surface does not use a protective film is in the construction process often occur, which cause damage to the tiles.
No comments:
Post a Comment